Can I use AlumaComp Unprimed Archival Aluminum Painting & Mounting Panels as can be found here?


I spoke with the folks at Gamblin colors about this and the answer is yes, but they recommend one of the two ways to "prime" the surface:


First, gently sand the textured side and then wipe with a small amount of alcohol or Gamblins' Gamsol. Then,


1) apply two coats of Gamblin oil ground, letting each dry thoroughly in between (allow this to all dry for 7 - 10 days)

2) apply 2 thin coats of acrylic water based gesso.


Once thoroughly dry, you can use your oil/cwm on them!